Call Us Free: 1-800-772-7737

FireVision IG, fire rated insulating glass units, utilize any of our fire rated glazing materials as components in insulating glass units.

FireVision IG provides fire resistant integrity, optimum energy conservancy, and reduced energy consumption and utility costs.  Ratings, thicknesses, and intended uses are determined by the specifications of  the glazing materials used.


Features

  • Fire rating determined by the glazing materials used as components in the insulating glass unit
  • Transparent and wireless glass
  • Approved for use with any standard fire rated frame with the same rating
  • Conforms to positive pressure test standards
  • Contributes to optimum energy conservation
  • Reduces energy costs
  • Warm Edge Super Spacer passes the toughest industry tests (ASTM 2190 / EN 1279)
    • ASTM E330 1200 psf positive, 1550 psf negative
    • Warmer sightline, improved U-Value, improved noise reduction

Stats

See Stats pertaining to the variety of FireVision glass used in the FireVision IG make-up.

Listings

See Listings pertaining to the variety of FireVision glass used in the FireVision IG make-up.

Labeling

Each lite of FireVision IG fire rated glass shall be permanently labeled with product and manufacturer’s name, UL certification mark, etc.

Specifications

Storage and Handling

FireVision IG fire-rated glass should be handled with care during transportation, storage, inspection, and installation. It should be stored in dry conditions only and needs to be stacked upright, at a slight angle. In addition, the glass panels must be separated by an appropriate material, such as soft pads made of cork, and the bottom edge must be supported along its entire length.

Installation

FireVision IG shall only be installed into fire-rated frame and window assemblies carrying the same rating. Each FireVision IG unit should be inspected carefully before installation, and any pieces with visible surface damage should be sorted out. All glazing components and the stop height must be chosen according to the appropriate UL classification. The glass panel must be placed on calcium silicate or hardwood setting blocks and glazed using appropriate glazing tape, such as closed cell PVC, Fiberfrax tape or Pemko FG3000S90. The installation of the framed unit must comply with the frame supplier’s instructions.

Maintenance

To maintain the aesthetics, it is important to keep the glass panel clean. A soft, clean, non-abrasive cloth and a mild soap, detergent, or non-abrasive glass cleaning solution is suitable for cleaning. After cleaning, rinse immediately with clean water and remove any excess water from the panel surface. Also, do not allow any metal or hard parts of the cleaning equipment to come in contact with the glass panel surface.

Downloads

Brochure

• Specifications – FireVision IG

Contact Us

Coral Industries, Inc.

1-800-772-7737, ext. 1376

firevision@coralind.com